Horizontal Stepper

Horizontal Steppers allow for variable control with set intervals that send commands when the value is changed.

The default range for sliders is dependant on the control method.

  • Steppers with MIDI control methods will output a maximum range of 0 to 127. The upper value is adjusted using velocity parameter.
  • OSC and HTTP control methods will output a value of 0 to 1 with a variable upper value.
  • Horizontal Steppers declare 0 to be the left position and 1 the right position of the stepper handle.

Action Map

The action map below details the point at which commands are sent

Touch Ready Touch Begin Touch Down Touch Release Touch End
X X X On Mode X

Control Methods

Type On Mode Example
MIDI MIDI Channel, Note, Velocity Channel: 1 Note: 60 Velocity: 0 to 127
OSC OSC Message [Double], Patch /ctrl/stepper (Value auto added)
HTTP HTTP Address [Double] use $1, Patch /ctrl.php?value=$1 (Value $1)
TCP TCP String [Double] use $1, Patch /ctrl/tcp/$1 (Value $1)
UDP UDP String [Double] use $1, Patch /ctrl/udp/$1 (Value $1)

Response Methods

Use external applications to operate this control with OSC.

Send the string /ctrl/control/[uid]/[command] with the control's UID and selected command

Response Commands

/enabled [Int] Enable or disable the control (0 - Disabled, 1 - Enabled)
/position [Double] Change the position of the slider handle (0 to 1)
/theme [Int] Change the theme of the control (Int 1 to 14)
/theme [Int] [String] Change the theme of the control using custom palette name (Int 1 to 14)